Led Linear light LEN-MO Detec. OnOff movement
Detection from high altitude by microwave
The high bay led LEN-MO series is a LED designed to self-managed through its own microwave movement radar. Switching it on or off (On-Off mode) will occur when detecting presence,configuring times and movement detection area (50% to 100%).
This radar is not influenced by heat, and is ideal for applications where the use of the work area is intermittent, increasing savings energy up to 90% use of the work area is intermittent, increasing savings energy up to 90% compared to a conventional LED .
NF2L757DR Japanese technology of high efficiency and durability.
High bay linear led
High bay linear led lighting, specifically designed for aisle area between shelves: it provides greater energy savings and also, a higher level of brightness, because we vectorize the beam of light thanks to the use of specialized optics.
|Reference||Power (W)||Driver||Color |
|N° Led PCB||Lumens |
|Weight (Kg)||Driver |
|SMD LED |
|LED LINEAR HIGH BAY RADAR LAN8-100MO-XXx||100W||Mean Well||30-40-50||128||13000||-30 a 50°C||137x587x102||3.9 ±0.3||1.9/~42||158/~6|
|LED LINEAR HIGH BAY RADAR LAN8-150MO-XXx||150W||Mean Well||30-40-50||192||19500||-30 a 50°C||137x819x102||5.2 ±0.3||2.6/~42||162/~6|
|LED LINEAR HIGH BAY RADAR LAN8-200MO-XXx||200W||Mean Well||30-40-50||256||26000||-30 a 50°C||137x1050x102||6.2 ±0.3||3.2/~42||160/~6|
The High bay linear LED are designed for installation in logistics centers and shops, they generate a rectangular lighting pattern that fits perfectly in the transit area.
It provides an efficient and intelligent solution for medium and high-rise lighting in corridor areas:
storage and product exposure.
No losses by reflectors
Compared to traditional high bay led with COB chip or HID lamp, the linear high bay led saves between 60 and 90% of energy, thanks to its geometry, applied optics and the use of IC systems.This contributes to an intelligent use of energy resources.
A rational use helps to be more competitive.
Save up to 90%
The selection of an adequate optics according to the height and width of the corridors, in combination with the presence detection system, will reduce the energy consumption where it is not necessary.
Detection of presence up to 15 meters high.
They can be controlled remotely: turn off, turn on, dim or increase the lighting using a smart phone. It allows the possibility of creating scenarios (opening, closing, visits, etc) of your trade or industry, or controlling them using a simple remote control.
Smart control IC modes
The light sensor works in combination with the Zigbee control system. If it detects enough ambient light, it attenuates or extinguishes a certain area.
In the combined mode:
If the ambient light varies, the lamps vary the light that they contribute until reaching the set brightness level.
In twilight mode:
If natural light falls below the set value, the lamps light up at the preselected level.
If it is not detected for a while, we can turn it off completely or keep it at a preselected level.
- NICHIA NF2L757DR
- LED efficiency
- 170lm/W - 5000K ±5%
- Efficiency sys. brigh
- MEAN WELL / SOSEN Dimerizable (1-10V)
- 100-277VAC 50-60Hz
- Power factor
- Union temperature (Tj)
- Less than 75°C (Ta equal to 3°C)
- Degree of protection
- Optical protection level
- More than 50000h. (LM70 & 30°C)
- (a) 30x70° / (b) 120° / (c) 90° / (d) 40x120° / (e) 50x90º