Led Linear Light LEN-Y Emergency

Corridor lamp that does not leave you without light.

The linear high bay LED LEN-Y, is a linear lamp that in most critical moments acts as an emergency light. It uses optics that focus the 100lux (2) of a conventional 120º to 250lux (3) luminaire between shelves. The SMD LED technology and specialized lenses redirect the light beam towards the useful zone of the corridors and confer a great comfort of light.

len-t-lux-c.jpg

1) Emergency module operation indicator.

2) Push button to enable the emegency function.

IES.jpg NF2L757DR Japanese technology with high efficiency and durability.

logo-nichia-c.png
logo-sosen-c.png

Optics 30x70º

Optics 120º

Optics 90º

Optics 40x120º

Optics 50x90º

LED linear high bay with emergency light.

Turn it into a smart luminaire:

Zigbee.gif

Led linear lighting, specifically designed for aisle area between shelves: it provides greater energy savings and also a higher level of brightness, because we vectorize the light beam thanks to the use of specialized optics.

 
 
plano-len-y-c.jpg
       Reference       Power (W)DriverColor temperatureN° Led PCBLumens (Im)*Work temperatureDimensions
AxBxC (mm)		Weight (Kg)Driver
(A)/(V)		SMD LED
(mA)/(V)
LED LINEAR HIGH
BAY EMERGENCY
LEN8-150Y- XXx
150W
Sosen
30-40-50
192
19500
0 a 40°C
137x718x102
5.7 ±0.3
2.6/~42
162/~6
LED LINEAR HIGH
BAY EMERGENCY
LEN8-200Y- XXx
200W
Sosen
30-40-50
256
26000
0 a 40°C
137x948x102
6.7 ±0.3
3.2/~42
160/~6
*Actual efficiency of the light system according to optics ( CCT=5000K 130 lm/W)± 5% depending on the color temperature.
temp-color-en-c.png

INTEGRATED EMERGENCY SYSTEM

It incorporates the battery together with the control and driver electronics inside.

len-y-driver-c.jpg

No losses by reflectors

linear-high-bay led-c.jpg
high-bay-led-COB-c.jpg

Compared to traditional high bay led with COB chip or HID lamp, the linear high bay led saves between 60 and 90% of energy, thanks to its geometry,applied optics and the use of IC systems.This contributes to an intelligent use of energy resources.

A rational use helps to be more competitive.

Presence detection

Save up to 90%

The selection of an adequate optics according to the height and width of the corridors, in combination with the presence detection system, will reduce the energy consumption where it is not necessary..

Detection of presence up to 15 meters high.

sensor-movimiento-c.jpg

Remote control

They can be controlled remotely: turn off, turn on, dim or increase the lighting using a smart phone. It allows the possibility of creating scenarios (opening, closing, visits, etc) of your trade or industry, or controlling them using a simple remote control.

remote-control-c.jpg

Smart control IC modes

sensor-luz-1-c.png

The light sensor works in combination with the Zigbee control system. If it detects enough ambient light, it attenuates or extinguishes a certain area.

sensor-luz-2-c.png

In the combined mode:
If the ambient light varies, the lamps vary the light that they contribute until reaching the set brightness level.

sensor-luz-3-c.png

In twilight mode:
If natural light falls below the set value, the lamps light up at the preselected level.

sensor-luz-4-c.png

Presence detection:
If it is not detected for a while, we can turn it off completely or keep it at a preselected level.

06

Data sheet

LED
NICHIA NF2L757DR
LED efficiency
160lm/w - 5000K ±5%
Efficiency sys. brigh
Greater Than 80%
DRIVER
SOSEN - Dimmable (1-10Vcc
Voltage
100-277VAC 50-60Hz
Power factor
0.92
Union temperature (Tj)
Less than 75°C (Ta equal to 3°C)
CRI
80
Degree of protection
IP20
Optical protection level
IK10
Lifetime
More than 50000h. (LM70 & 30°C)
Optics
30x70º / 120º / 90º / 40x120º / 50x90º